Acabo de ponerlo como estaba, ahora ya me va como antes, sin querer había desmarcado el bit 3 del byte 27, menos mal que está lo del historialagustin1 escribió:Byte27 Vehicle Equipment Byte Information
Bit 0 VAQ Installed
Bit 1 PLA2 w/ Braking Intervention Installed
Bit 2~3 Dynamic Start Assist
Bit 4~6 TPMS Configuration======================> Bit 4, 5, & 6 unchecked Without TPMS (PR. 7K0) OR TPMS High (PR. 7K3)
Bit 7 DCC Installed Bit 5 checked TPMS (PR. 7K9) w/o Radio (PR. 8AA)
Bit 4 & 5 checked TPMS (PR. 7K9) w/ Radio (PR. I8A/I8B/I8D/I8E/I8H)
Bit 4 & 6 checked TPMS (PR. 7K6) w/ Radio (PR. I8A/I8B/I8D/I8E/I8F/I8H)
Bit 5 & 6 checked TPMS (PR. 7K1) w/o Radio (PR. 8AA)
Bit 4, 5 & 6 checked TPMS (PR. 7K1) w/ Radio (PR. I8A/I8B/I8D/I8E/I8H)
Byte28
Bit 0~1 Driver Out Apply Version. (Possibly EPB related)
Bit 2 Autohold turn on message
Bit 3 Forward Collision Warning Pedestrian
Bit 4 BAP - Autohold
Bit 5 BAP - Hill Descent Control
Bit 6 BAP - ESC Button
Bit 7 BAP - TPMS button (PR. 7K1, 7K6, 7K9)
Enviado desde mi Mi A2 Lite mediante Tapatalk