Decodificar archivos .clb (Labels Vag COM)

[Lopezoso]

Bueno,

me ha pillado de refilon tener que pegarme con un Ibiza 6J y ver que cosas se le pueden hacer (pocas la verdad), por ahora.

El tema esta en que los cables actuales que tenemos "baratos" al alcance de nuestras manos no traen las labels de los modelos nuevos, te deja acceder a las centralitas pero nada mas, no sale nada de lo que vale cada bit. (han sacado unas labels para el golf VI pero interpretando unos pantallazos del cable original)

Bueno, pues trasteando y dandole a la cabeza y ver que la dinamica del vcds ahora (version 10.6 hablo) no trabaja con ficheros .lbl, los soporta pero no trabaja con ellos, ahora trabaja con ficheros .clb que vienen codificados para que no podamos verlos.

Tras buscar un editor de archivos .clb pegarme con un puñetero club que da la casualidad que se llama edit clb que no veas la morralla que me metia en las busquedas de google xDD, leerme post de microsoft de que si visual basic noseke, doy con un foro ruso de vags, que esta todo puesto en ruso excepto una palabra svcdec seguido el nombre de un fichero clb. encoder-decoder.

Se me salieron los ojos de las cuencas.

Me meti en la pagina de ross tech y me descargue la ultima version del vcds (la 10.6.3) me lo instale en el pc sin instalar los USB Drivers. Y en la carpeta labels busque el archivo 6R0-937-08X-09.CLB.

Me descargo el SVDEC ( http://www.megaupload.com/?d=O96GMI3Z lo he subido yo por si acaso el ruso desaparece)

me creo una carpeta en C: ( C:\SVCDEC\ )

Dentro meto tanto el fichero .exe que viene dentro del zip como el archivo .CLB a decodificar.

Inicio -> Ejecutar -> escribimos cmd en la ventana que se nos abre y le damos a Aceptar

Se nos abre una ventana negra.

nos vamos a la ruta donde tengamos todos los archivos. y ejecutamos lo siguiente

SVCdec.exe "C:\svcdec\6R0-937-08X-09.clb" brt -maxlines=50 -fastbrt -lang=en

En otro reply pondre los diferentes parametros que se pueden lanzar, pero he probado un poco por encima y el que me ha resultado ha sido el que pongo aki.

magia nos crea un fichero .lbl

Aqui es el punto donde estoy ahora mismo.

con el fichero que nos crea para los modelos nuevos ya se puede aunque sea leyendolo entender algo y hacerlo a ciegas con el cable.

Tengo que probar con mas labels para ver si no hace falta "traducir" el fichero que nos crea

Si quereis probar y nos ayudamos, pues mejor.

[Lopezoso]

este es el resultado de la label de la centralita del ibiza (ni el original aun tiene labels)

;
; SVCdec vers.0.1.1 (26ag10)
;
; sublimity - vcds - clb - file - decoder-encoder
;
;
LC,00,5=,Only Limited Coding Information is available for this Control Module.
LC,00,6=,If you happen to need additional Details please contact Support@Ross-Tech.com
LC,00,7=,Coding is normally done using the Factory Tool and Software-Version-Management (SVM).
A000,0,Learned Value clearing
A000,5,Lernwerte löschen
A000,6,This Channel resets/clears all learned Remote Controls.
A003,0,Central Locking: Auto-Lock
A003,5,Central Locking: Auto-Lock
A003,6,The doors will lock automatically when the
A003,7,vehicle reaches a speed of 15 km/h or 10 mph.
A003,8,
A003,9,Range: 0 = OFF / 1 = ON
A004,0,Central Locking: Auto-Unlock
A004,5,Central Locking: Auto-Unlock
A004,6,The doors will unlock automatically when
A004,7,the key is removed from the ignition switch.
A004,8,
A004,9,Range: 0 = OFF / 1 = ON
A006,0,Central Locking: Selective (Single) Door Locking
A006,5,Central Locking: Selective (Single) Door Locking
A006,6,0 = All Door Locking
A006,7,1 = Selective (Single) Door Locking
A007,0,Central Locking: Auto-Lock/Unlock for Rear Lid
A007,5,Central Locking: Auto-Lock/Unlock for Rear Lid
A007,6,Locks the Rear Lid once a Speef of 5 kph is reached.
A007,7,
A007,8,0 = Auto-Lock/Unlock for Rear Lid inactive
A007,9,1 = Auto-Lock/Unlock for Rear Lid active
A008,0,Visual Comfort Operation/Closing Confirmation
A008,5,Visual Comfort Operation/Closing Confirmation
A008,6,Turn Signals as Comfort Operation/Closing Confirmation.
A008,7,
A008,8,0 = Visual Comfort Operation Confirmation inactive
A008,9,1 = Visual Comfort Operation Confirmation active
A009,0,Central Locking: Audible Unlocking Confirmation
A009,5,Central Locking: Audible Unlocking Confirmation
A009,6,Alarm Horn as Unlocking Confirmation
A009,7,
A009,8,0 = Audible Unlocking Confirmation inactive
A009,9,1 = Audible Unlocking Confirmation active
A011,0,Central Locking: Audible Locking Confirmation
A011,5,Central Locking: Audible Locking Confirmation
A011,6,Alarm Horn as Locking Confirmation
A011,7,
A011,8,0 = Audible Locking Confirmation inactive
A011,9,1 = Audible Locking Confirmation active
A012,0,Central Locking: Visual Locking/Unlocking Confirmation
A012,5,Central Locking: Visual Locking/Unlocking Confirmation
A012,6,Turn Signals as Locking/Unlocking Confirmation.
A012,7,
A012,8,0 = Visual Locking/Unlocking Confirmation inactive
A012,9,1 = Visual Locking/Unlocking Confirmation active
A014,0,Anti-Theft: Alarm Horn (Country Setting)
A014,5,Anti-Theft: Alarm Horn (Country Setting)
A014,6,The Alarm Horn Country Setting alters the Type/Lenght and
A014,7,Volume of the Alarm Tone (please obey all applicable laws).
A014,8,
A014,9,0 = Frequency modulated with 10 Tamper Alarms
A014,10,1 = Frequency modulated with 1 Tamper Alarm
A020,0,Lights: Comfort Turn Signals
A020,5,Lights: Comfort Turn Signals
A020,6,0 = Comfort Turn Signals inactive
A020,7,1 = Comfort Turn Signals active
A021,0,Lights: Emergency Brake/Hazard Light Flashing
A021,5,Lights: Emergency Brake/Hazard Light Flashing
A021,6,Flashes the Hazard Lights in case of an Emergency Braking
A021,7,
A021,8,0 = Emergency Brake/Hazard Light Flashing inactive
A021,9,1 = Emergency Brake/Hazard Light Flashing active
A022,0,Lights: Parking Lights
A022,5,Lights: Parking Lights
A022,6,0 = Parking Light Function inactive
A022,7,1 = Parking Light Function active
A023,0,Wipers: Front Wiper Service Mode/Position
A023,5,Wipers: Front Wiper Service Mode/Position
A023,6,0 = Front Wiper Service Mode inactive
A023,7,1 = Front Wiper Service Mode active
A024,0,Anti-Theft: Alarm Horn (Terminal 15)
A024,5,Anti-Theft: Alarm Horn (Terminal 15)
A024,6,0 = Alarm Horn with Terminal 15 inactive
A024,7,1 = Alarm Horn with Terminal 15 active
A026,0,Wipers: Front Wiper Tear Wiping
A026,5,Wipers: Front Wiper Tear Wiping
A026,6,0 = Front Wiper Tear Wiping inactive
A026,7,1 = Front Wiper Tear Wiping active
A028,0,Wipers: Rear Wiper Comfort Wiping
A028,5,Wipers: Rear Wiper Comfort Wiping
A028,6,Activates the Rear Wiper when engaging Reverse Gear
A028,7,while the Front Wipers are active/running.
A028,8,
A028,9,0 = Rear Wiper Comfort Wiping inactive
A028,10,1 = Rear Wiper Comfort Wiping active
A043,0,Lights: Comfort Turn Signals (Cycles)
A043,5,Lights: Comfort Turn Signals (Cycles)
A043,6,Range: 1...5
A043,7,Standard: 3
A060,0,Anti-Theft: Interior Monitoring Sensitivity
A060,5,Anti-Theft: Interior Monitoring Sensitivity
A060,6,Alters the Interior Monitoring Sensitivity to prevent False Alarms.
A060,7,
A060,8,Range: 100...200 (50...100 %)
A060,9,Resolution: 20 %
A061,0,Anti-Theft: Inclination Sensor Sensitivity
A061,5,Anti-Theft: Inclination Sensor Sensitivity
A061,6,Alters the Inclination Sensor Sensitivity to prevent False Alarms.
A061,7,
A061,8,Range: 100...200 (50...100 %)
A061,9,Resolution: 20 %
A099,0,Factory Mode
A099,5,Factory Mode
A099,6,The Factory Mode is being used to visualize Errors to
A099,7,the Workers during the Production and can once it's
A099,8,being deactivated not be reactivated again.
A099,9,
A099,10,0 = Factory Mode inactive
A099,11,1 = Factory Mode active
T83,Fuel Pump
T329,Rear Lid Unlocking
T901,Back-Up Lamp(s)
T906,Horn (H1)
T910,Indicator Lamp for Emergency Flashers (K6)
T911,Indicator Lamp for Heated Rear Glass (K10)
T920,Heated Mirrors Driver Side (Z4) & Passenger Side (Z5)
T959,Indicator Lamp for Central Locking Safe (K133)
T967,Left Turn Signals
T968,Right Turn Signals
T975,Heated Rear Window (Z1)
T1236,Shift Selector Locking Solenoid (N110)
T1357,Tank Flap Locking Motor (V155)
T1753,Windshield Wiper Motor (V) Stage 1
T1754,Windshield Wiper Motor (V) Stage 2
T1758,Brake Lamps
T2092,Enabling Heated Seat
T2674,Window Regulator Front Left: Up
T2675,Window Regulator Front Left: Down
T2676,Window Regulator Front Right: Up
T2677,Window Regulator Front Right: Down
T2678,Window Regulator Rear Left: Up
T2679,Window Regulator Rear Left: Down
T2680,Window Regulator Rear Right: Up
T2681,Window Regulator Rear Right: Down
T3080,Interior Light(s)
T3431,Parking Light Left
T3432,Parking Light Right
T3434,Interior Light(s) via Terminal 30G
T3436,Central Locking: Lock
T3437,Central Locking: Safe
T3438,Central Locking: Lock and Safe (Driver's Door only)
T3439,Central Locking: Lock and Safe (Passenger Door only)
T3440,Central Locking: Lock and Unlock LED
V,A63

[Lopezoso]

Código: Seleccionar todo

use: "FileName" [command] [params]
COMMAND:
   brt - brute force all lines and find vars : Z & P
   enc - encode lbl file and save to filename.clb
PARAMS:
   -lang=[en|de|ru] , def=de
   -method=[1|2|3] , def=1 , preset of vars : P & Z
   -keymet=NUM [1....8]
   -showlinenum - show line numbers , def=0
   -showallchar=[0|1] - show all chars (0..255) , def=1
   -findshowall=[0|1] - def=0
   -findline=NUM
   -findtxt='TEXT'
   -finddecode=NUM (0..255)
   -maxlines=NUM (def = 0)
   -showonlyerror
   -save  - save decoded file to basename(FileName).lbl , to current path
   -saveto='pathname' - save decoded file to basename(FileName).lbl
   -metvarz=NUM (0..255) - var method key pos Z or -z=22
   -metvarp=NUM (0..255) - var method key pos P or -p=3
   -fastbrt  - brute force only use key pos = (0..60) & (240..255)
simplzz:
   SVCdec.exe 'd:\7L6-9.clb' -save
   SVCdec.exe 'C:\svcdec\1\i\0AW-927-156.clb' -method=3 -saveto="C:/svcdec/1/o/"
   SVCdec.exe 'd:\7L6-9.clb' brt -saveto="results/" -maxlines=50 -fastbrt
   SVCdec.exe 'd:\7L6-9.clb' -saveto 'results/'
   SVCdec.exe 'd:\7L6-9.clb' -method=1
   SVCdec.exe 'd:\7L6-9.clb' -p=3 -z=250 -save
   SVCdec.exe 'd:\7L6-9.clb' -showlinenum
   SVCdec.exe 'd:\7L6-9.clb' brt -findline=10
   SVCdec.exe 'd:\7L6-9.clb' brt -maxlines=15 -lang=de -findshowall
   SVCdec.exe 'd:\7L6-9.clb' brt -findline=65 -finddecode=33
   SVCdec.exe 'd:\7L6-9.clb' brt -fastbrt
   SVCdec.exe 'd:\7L6-9.clb' brt
   SVCdec.exe 'd:\7L6-9.lbl' enc -z=33 -p=3


Note:
       -saveto="PATH" - in path use only `/`; `C:/path1/path2/` or  `path1/path2/`
       -method=3 =>  p=3 & z=233
       -method=2 =>  p=2 & z=250
       -method=1 =>  p=3 & z=250

Def use :
    >SVCdec.exe "d:\7L6-9.clb" -maxlines=5
    check result => good => add `-save` :)
    if error  => add command `brt` :
    >SVCdec.exe "d:\7L6-9.clb" brt -maxlines=50 -fastbrt -lang=en
    check result => if bad  => remove `-fastbrt` and edit `-lang=de` => check result  => if bad remove `-maxlines`