Jorre escribió:tomashell escribió:hay un error de PIN 7 a 3 en el cable de color y cambia la polaridad + y -?
Hello,
This confusion about the wiring colours and switching in polarity was held on page 36 of this brico.
Did you visually check the switch in colours between the loudspeaker and the quadlock?
I allready did the Seat Sound brico, following the directions of Red. So for me the only way to check is at the t27a connector.
This is the connector between the door and the car.
Hola
Esta confusión sobre los colores del cableado y el cambio de polaridad fue un héroe en la página 36 de este brico.
Revisaste visualmente el interruptor en colores entre el altavoz y el quadlock?
Yo ya hice el brico asiento sonido, siguiendo las indicaciones de Rojas.
Así que para mí la única forma de comprobar es en el conector de t27a.
Este es el conector entre la puerta y el coche.
Update:
i disconnected, opened and checked the t27a door connector and i can confirm that the colour switch as on the diagram of the 8RM is correct.
So indeed when doing the seat sound system upgrade, adapt the brico from Rojas with the update from Tomashell in order to have the correct polarity.
Actualización:
desconectarse, abrir y revisar el conector de puerta de t27a y puedo confirmar que el interruptor de color como en el diagrama del 8RM es correcto. De hecho, cuando hacer la actualización del Seat Sound System, adaptar el brico de Rojas con la actualización de Tomashell para poder tener la polaridad correcta.